SKOTTI starter guide - How to assemble your SKOTTI Grill

SKOTTI starter guide - How to assemble your SKOTTI Grill

Congratulations, you have just bought your SKOTTI Grill and are looking to go on your first adventure with your new companion! But how do you set up your new outdoor kitchen? Don't worry, it's easier than you'd expect! With some practice, you'll be able to do it in less than 30 seconds!

 Here's how it works:

Step 1: Connect the two pieces that are marked with the Triangles

Step 2: Now, connect the second side piece with the second long side piece

Step 3: You can now slide the grease pan into the slots in the middle of each of the pieces.

Step 4: Hang the gas pipe into the slot in the end piece above the ignition slot.

Step 5: Stick the radiation plate into the slots that are placed above the gas pipe.

Step 6: Use the remaining side part and stick the gas pipe through the whole while also fixating the radiation plate with the slots above the whole.

Step 7: Raise the side piece with the gas pipe and radiation plate above the grill and slowly let it slide into the slots in the other sice pieces.

Step 8: Place the grill grate onto the grill, nose facing the slot in the upper part of the side piece where the gas pipe leaves the grill. Make sure the nose of the grill grate passes through the slot. The system is now locked!

Step 9: Screw in the gas hose into the gas pipe and connect it to your gas canister!

You've done it! You are now ready to grill! Have fun and enjoy!

Back to blog

Leave a comment